Any Sim Racers on here?

  • Dark Theme is now available. Switch at the bottom of the page or in your preferences.
Nov 4, 2016
206
Hong Kong
#1
What are your cockpit setups and games?

I am currently build a set of hydraulic pedals... pics to follow...
 
Nov 4, 2016
206
Hong Kong
#4
ok so.... i bought a set of e9x manual pedals and the accelerator module...

IMG_20170620_231834.jpg


did a half assed mock up in 3d using tinkercad because its easier than sketchup (at the time)
IMG_20170623_112931.jpg


bought a bunch of stuff off alibaba and ebay
IMG_20170708_190141.jpg

put the frame together, mount the pedals
IMG_20170710_030929.jpg

dremel an actuator fitting to go over the brake pedal
IMG_20170720_021648.jpg

drill the angled aluminium brackets to mount the clutch master cylinder
IMG_20170722_005831.jpg

reused the old bracket from the original clutch master to connect the new clutch master
IMG_20170723_210614.jpg


then i realized the pedals arent angled enough when i put the accelerator pedal next to them (didnt take a pic but the brake pedal is sitting close to the bottom of the accelerator pedal when put together)
IMG_20170723_210802.jpg


thats all the progress for now, i have a few oil pressure senders, two pull clutch slave, a bunch of an3 fittings and crimped an3 brake hoses and two oil pressure gauges sitting here until i get around to mounting the pedals properly
20590810_10155043209669615_1763520918_o.jpg


i havent decided if i will keep this design as the 14mm rod might not be able to take the force from braking... and i have to drill more holes to more the pedals closer to the clutch master to they angle out more....
 
Last edited:

doublespaces

Administrator
Oct 18, 2016
6,684
AZ
#5
I have nothing to compare this to as this is totally new to me, but it looks awesome!
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Similar threads

Top