I already have a Fuel-it stage 2 fuel pump. I am planning to add port fuel injection so I am curious of any homebrew ideas for adding another pump to my fuel setup to accomidate the extra fuel that will be needed. I assume that I will be adding an extra pump like a Walbro 450 or something similar, and will need to power it from a secondary power source and add a "hobbs switch" or something to trigger it as needed.
I am currently running 17t's and have FBO, catless exhaust, 7" stepped IC, 2" inlets, outlets, etc. I already have a JB4, usually stay on map 5 and I use XHP stage 3 flash on my transmission. I already have the N20 map sensor, eldor coils, colder NGK plugs, etc. The car runs strong and I get no misfires etc. But to get to the next power level I know I am going to need more fuel so that is why I am gathering parts for a port injection setup. I already found a cheap used JB4 Port Injection controller (since I already have the JB4). I plan to find a tuner and will be using custom MHD flashes from that tuner. Right now I want to get the fuel pump, etc. sorted out so I need advice on extra fuel. Like I said I already have a stage 2 pump installed and just need to add another pump for the PI. I am pretty good at fabrication so advising me to buy a $1,000 stage 3 or 4 pump is not helpful. What I could really use is advice from someone who knows what pump, parts, adapter fittings, etc. to get for a DIY solution. I made my own external PCV, dual catch can setup so cobbling sgtuff together is no biggie. But when I pull the fuel pump out I would really like to have the parts and adapters, etc. I need with a solid plan to get it done quickly.
Thanks for any advice or just light humor, but troll the next guy please.
I am currently running 17t's and have FBO, catless exhaust, 7" stepped IC, 2" inlets, outlets, etc. I already have a JB4, usually stay on map 5 and I use XHP stage 3 flash on my transmission. I already have the N20 map sensor, eldor coils, colder NGK plugs, etc. The car runs strong and I get no misfires etc. But to get to the next power level I know I am going to need more fuel so that is why I am gathering parts for a port injection setup. I already found a cheap used JB4 Port Injection controller (since I already have the JB4). I plan to find a tuner and will be using custom MHD flashes from that tuner. Right now I want to get the fuel pump, etc. sorted out so I need advice on extra fuel. Like I said I already have a stage 2 pump installed and just need to add another pump for the PI. I am pretty good at fabrication so advising me to buy a $1,000 stage 3 or 4 pump is not helpful. What I could really use is advice from someone who knows what pump, parts, adapter fittings, etc. to get for a DIY solution. I made my own external PCV, dual catch can setup so cobbling sgtuff together is no biggie. But when I pull the fuel pump out I would really like to have the parts and adapters, etc. I need with a solid plan to get it done quickly.
Thanks for any advice or just light humor, but troll the next guy please.
Last edited: